Epson Stylus Pro 3880 Designer Edition Color Management Manual page 9

Set Up the Photoshop Environment
1. Open Photoshop.
2. Select
Edit > Color Settings
3. Select
North America Prepress 2
(1998) as the RGB working space and activate profile messages.
4. Click .
OK
Follow the steps in the next section to open the photo you want to print and
assign a profile to it.
Assign a Profile to Your Photo
1. Open the photo you want to print.
2. If you see an Embedded Profile Mismatch message, select
embedded profile
If you see a Missing Profile message, select
and click
RGB (1998)
balance and contrast as displayed on your monitor. If it looks incorrect, select
Edit > Assign Profile
.
from the Settings menu to set Adobe RGB
and click .
OK
. When your image appears, evaluate the color
OK
.
Print With Adobe Photoshop CS3 and CS4
Use the
Assign working RGB: Adobe
9