Troubleshooting The Remote Control - HP CQ2900 User Manual

Button
Teletext (Text)
Red
Green
Yellow
Blue

Troubleshooting the remote control

If the remote control doesn't work:
Make sure that the batteries for the remote control are charged and installed correctly.
●
Make sure the front of the remote sensor (IR receiver) is not blocked.
●
If a pressed key repeats itself or sticks, try altering the lighting conditions in the room, moving the
●
location of the remote sensor if this continues.
Press the
●
Point the remote control toward the remote sensor, and press a button. A faint light should appear
●
on the remote sensor. If the light appears, then the problem is with the software. Close the
software, restart the computer, and open the software again.
If the remote control works in the software but not when changing channels, you need to
●
reconfigure the software setting for the cable set-top box or satellite receiver.
14 Chapter 3 Using the remote control
Function
Toggle button to turn Teletext on and off. This button opens page 100, or the home page. The
Teletext page completely replaces the TV or Windows Media Center display; however, sound is
still available. To return to the TV or Windows Media Center display, press this button again. On
some displays, Teletext can be viewed over the display picture.
Opens the red Fasttext shortcut link when display is in Teletext mode.
Opens the green Fasttext shortcut link when display is in Teletext mode.
Opens the yellow Fasttext shortcut link when display is in Teletext mode.
Opens the blue Fasttext shortcut link when display is in Teletext mode.
Enter button on the remote control after changing a channel.
ENWW