HP Presario S7000 - Desktop PC Important Information

Important Information About
Your Wireless PCI Adapter

Your Wireless PCI Adapter consists of:

One external remote antenna with attached
■
1.5 meters (5 feet) cable
One (small sized) CD with Quick Installation Guide
■
and User's Manual.
NOTE: The PCI adapter card and driver are pre-installed in
your PC.
1 Locate the antenna and the CD, labelled Wireless
PCI Adapter; they are together in the PC box or
accessory box.
A B
Filename: s4adwlaK Title: Addendum [3-column 1 or 2 pages]
Template: HP-Print2K.dot Author: WASSER Studios
Revision #: 6 Page: 1 of 1 Printed: 02/02/04 10:44 AM
2 Screw the antenna cable to the antenna
connector (A) located on the back of your PC
near the PCI adapter status indicators (B).

3 Place the antenna on the desktop PC or a table

to get better data transmission and reception.
4 Configure the Wireless PCI Adapter. Refer to the
documentation on the CD.
Refer to the Quick Installation Guide or the User's
Manual on the CD for steps to connect, position the
antenna, or configure your Wireless PCI Adapter.
Last Saved By: James Legatt
Printed in