Keyboard And Mouse - HP Presario S7000 - Desktop PC User Manual

keyboard and mouse

Symptom
Keyboard commands and
typing are not recognised
by the PC.
Cursor will not move using
the arrow keys on the
keypad.
The keyboard Print button
does not work.
Wireless keyboard does not
work after installation or is
not detected.
Mouse does not respond to
movement or is too slow.
Mouse moves only vertically
or horizontally.
Mouse does not work after
installation or is not
detected.
74
user's guide
Problem
Keyboard connector is not
properly connected.
Program in use has stopped
responding to commands.
Keyboard is damaged.
The Num Lock key may
be on.
Some programs do not
recognise the Print button.
Keyboard batteries are low
or empty.
Mouse connector is not
properly plugged into the
back of the PC.
Program in use has stopped
responding to commands.
Mouse roller ball is dirty.
Mouse is damaged.
Mouse is not connected
properly.
Wireless mouse batteries
are low or empty.
Solution
Turn off the PC by using the mouse, reconnect the keyboard
to the back of your PC, and turn on your PC.
Restart or turn off your PC using the mouse.
Press the Help ? button on the keyboard to open the Help &
Support Center, or refer to the Warranty & Support Guide
to contact Support for replacement details.
Press the Num Lock key. The Num Lock light should not be
on if you want to use the arrow keys in the number keys
group.
Use the Print menu item in the program.
Replace the two AA alkaline batteries in the wireless
keyboard; then set the ID channel by pressing the Connect
button on the wireless receiver, and then on the keyboard.
Refer to the documentation that came with your wireless set.
Turn off your PC using the keyboard:
Press the Ctrl and Esc keys on the keyboard at the same
1
time to display the Start menu.
Use the up or down arrow key to select Turn Off
2
Computer, and then press the Enter key on the
keyboard.
3 Use the up or down arrow key to select Turn Off, and
then press the Enter key.
After the shutdown is complete, plug the mouse connector
into the back of your PC, and turn on your PC.
Restart your PC by using the keyboard. If possible, save any
open files and close open applications before restarting.
Remove roller ball cover from bottom of mouse and clean
the ball with a damp, lint-free cloth (not paper).
Press the Help ? button on the keyboard to open the Help &
Support Center, or refer to the Warranty & Support Guide
to contact Support for replacement details.
Try unplugging and then reconnecting the mouse cable to
your PC.
Replace the two AA alkaline batteries in the mouse; then set
the ID channel by pressing the Connect button on the
wireless receiver, and then on the mouse. Refer to the
documentation that came with your wireless set.