TECRA A11/S11, Satellite Pro S500
6. Lift the plastic film and clean the cooling module using a vacuum
cleaner or other cleaning tool.
Do not use a ball pen, cotton swap or similar to remove dust. If these touch
the inside of the computer, it could be damaged or become clogged,
leading to further problems.
7. Slide the Cooling module cover back into place on the computer to
reattach.
8. Install the battery pack (refer to the
in Chapter 6,
9. Turn your computer over.
F-4
Figure F-2 Lift the plastic film
Power and Power-Up
1. Plastic film
1
Replacing the battery pack
Modes, if required).
section
User's Manual