Toshiba PTSE0U-02P00M User Manual page 158

TECRA A11/S11, Satellite Pro S500
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer. when the TOSHIBA Leading
Innovation >>> screen appears, release the F12 key.
2. Use the up and down cursor keys to select the boot device you want
and press ENTER.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition,
if you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
USB Memory BIOS Support Type
This option allows you to set the type of the USB memory to be used as a
startup device.
HDD
FDD
Keyboard
Wake-up on Keyboard
When this feature is enabled, and the computer is in Sleep Mode, you can
turn on the system by pressing any key. However, please be aware that this
option will only work with the internal keyboard and only when the computer
is in Sleep Mode.
Enabled
Disabled
7-4
Sets the USB memory to be the equivalent of a hard
disk drive (default). With this setting, the USB
memory device can be used to start the computer as
though it were a hard disk drive based on the hard
disk drive settings within both the Boot Priority and
HDD Priority options detailed previously.
Sets the USB memory to be the equivalent of a
floppy diskette drive. With this setting, the USB
memory device can be used to start the computer as
though it were a floppy diskette based on the floppy
diskette drive settings within the Boot Priority option
detailed previously.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function
(Default).
User's Manual