4-18
Make sure you do not forget the password, or else, you need to drain CMOS RAM and
reconfigure your system.
If you do not want to use a password, perform the above procedure. However, instead
of typing and confirming a password when prompted, just press <Enter>. The
message "Password Disabled!" will flash on screen.
Save & Exit Setup
This item allows you to save all the changes made before leaving BIOS Setup Utility.
You will be prompted with the following question:
Save to CMOS and EXIT (Y/N) ? _
Press 'Y', then 'Enter', to save and exit BIOS setup Utility.
Exit Without Saving
Select this item to discard all changes made and to leave BIOS Setup Utility. You will
be prompted with the following question:
Press 'Y', then 'Enter', to leave Setup Utility.
Quit Without Saving (Y/N) ? _
Chapter 4: BIOS Setup