Lenovo Ispirati 2001 User Manual page 37

4-6
Item
CPU L2
Cache ECC
Checking
Processor
Number
Feature
Quick Power
On Self Test
First Boot
Device
Second Boot
Device
Third Boot
Device
Boot Other
Device
Boot Up
Floppy Seek
Boot Up
NumLock
Status
Gate A20
Option
Typematic
Rate Setting
Typematic
Rate
(Chars/Sec)
Typematic
Delay
(Msec)
Security
Option
OS Select For
Options
Disabled Enables or disables ECC checking of
CPU L2 cache.
Enabled
Disabled Allows BIOS to show Intel Pentium III
processor serial number or not.
Enabled
Disabled 'Enabled' allows the BIOS to skip
Enabled certain tests during boot.
Floppy
Determines the sequence where
LS/ZIP BIOS attempts to read the boot
record during startup.
HDD-0
SCSI
CDROM
HDD-1
HDD-2
HDD-3
LAN
Disabled
Disabled 'Enabled' allows BIOS to read boot
record from other boot devices if the
Enabled
first three devices failed.
Disabled 'Enabled' causes BIOS to check if the
Enabled floppy disk drive installed is 40 or 80
tracks. (360K type is 40 tracks, 720K,
1.2M, or 1.44M are 80 tracks.)
Determines the default state of the
On
numeric keypad. 'On' is for number
Off
keys while 'Off' is for arrow keys.
Fast Gate A20 is a device used to address
Normal memory above 1MB.
'Fast' - chipset provide support.
'Normal' - keyboard provide support.
Enabled Enables or disables typematic rate
Disabled and typematic delay.
6 If 'Typematic Rate Setting' is enabled,
8 this option sets the rate at which
10 characters on the screen repeat when
12 a key is pressed and held down.
15
20
24
30
250 If the 'Typematic Rate Setting' is
500 enabled, this determines the delay
750 between when the key was first
1000 depressed and when the acceleration
begins.
System Sets the level of system security.
Setup
'System' requires supervisor or user
password during system boot.
'Setup' requires password to access
BIOS Setup Utility. Supervisor
password provides access to all BIOS
settings while user password allows
changing user password only.
Non-OS2 'OS2' allows the access of memory
Chapter 4: BIOS Setup
Description