Restart Menu - Lenovo ThinkPad L420 User Manual

Priority for booting USB devices
If you attach two or more USB devices of the same type to the computer, for example, two USB CD-ROM
drives or two USB diskette drives, the computer starts the devices in accordance with the boot priority
order specified for the USB connectors.
If you are using USB connectors on your computer only, without attaching the computer to a ThinkPad Port
Replicator Series 3, the boot priority order is as follows:
1
1. USB connector on the right side (rear) of your computer
2
2. USB connector on the right side (front) of your computer
3
3. USB connector on the left side of your computer
4. USB connector 4 on the rear side of your computer
Network Boot submenu
Use the Network submenu to select the boot device when the system wakes from LAN. If Wake on LAN is
enabled, the network administrator can turn on all of the computers in a LAN remotely by use of network
management software.
Other items in the Startup menu
• Boot Mode: Enable or disable the diagnostics boot mode.
• Option Keys Display: Choose whether to show the option key message when the system is booted.
• Boot device List F12 Option: Choose whether to show the list of the boot devices.

Restart menu

If you need to close the BIOS Setup Utility and restart the system, select Restart from the BIOS Setup
Utility menu. The following submenu is displayed:
• Exit Saving Changes: Restart the system after saving the changes.
• Exit Discarding Changes: Restart the system without saving the changes.
• Load Setup Defaults: Load the setup default settings.
• Discard Changes: Discard the changes.
• Save Changes: Save the changes.
142
User Guide