Lenovo ThinkPad L410 Deployment Manual page 50

Table 6. Power Agenda* (continued)
Policy settings
Peak power scheduler - time
Days of week
Notify
Disable peak power scheduler
44
Power ManagerDeployment Guide
Description
Specifies when the Peak power scheduler setting is
effective.
If you set the Action policy setting to Peak power
scheduler, you should enable this policy setting.
The Peak power scheduler setting is enabled only during
the period specified in this policy setting.
Specifies the days of a week that the power agenda runs
weekly.
If you enable this policy setting, you should select the
days of a week.
If you disable or do not configure this policy setting, but
set the Frequency policy setting to Weekly, users cannot
use this power agenda on client computers. See the
frequency policy setting in Table 6 "Power Agenda*" on
page 39.
Specifies whether or not to notify users before the power
agenda runs.
If you enable this policy setting, you can select the
notification time before the power agenda runs on client
computers. The range of the notification time is from 1 to
60 minutes.
If you disable or do not configure this policy setting, users
will not be notified before the power agenda runs on
client computers.
Note: If you enable this policy setting, but clear the
notification check box, users will not be notified before
the power agenda runs on client computers.
Specifies the situations for the Peak power scheduler
setting to be disabled.
If you enable when remaining battery level is less than,
you must provide a value in percentage. When a battery
remaining percentage is less than this value, the Peak
power scheduler setting will be disabled.
If you enable automatically by monitoring the battery
usage, the Peak power scheduler setting will be
automatically disabled according to the battery usage.