Table 2. Power Plan (Scheme) Deployments (continued)
Policy settings
Allow Hybrid Sleep (AC)
Allow Hybrid Sleep (DC)
Allow Wake Timers (AC)
Allow Wake Timers (DC)
Wireless Power Saving Mode (AC)
20
Power ManagerDeployment Guide
Description
Enables Hybrid Sleep.
If you enable this policy setting and select On, a file
called hiberfil.sys is generated to store the contents of
RAM (Random Access Memory) when the system enters
sleep (Stand by) mode.
This setting is not supported on Windows XP client
computers.
Enables Hybrid Sleep.
If you enable this policy setting and select On, a file called
hiberfil.sys generated to store the contents of RAM when
the system enters sleep (Stand by) mode.
This setting is not supported on Windows XP client
computers.
Specifies whether to allow the Windows operating system
to automatically wake your computer from sleep mode on
a timer for scheduled tasks and other programs.
If you enable this policy setting, the system, for example,
might wake automatically to install updates.
This setting is supported only on Windows 7 client
computers.
Specifies whether to allow the Windows operating system
to automatically wake your computer from sleep mode on
a timer for scheduled tasks and other programs.
If you enable this policy setting, the system, for example,
might wake automatically to install updates.
This setting is not supported on Windows 7 client
computers.
Specifies the performance of wireless adapters.
Possible performances include:
• Maximum Performance
• Low Power Saving
• Medium Power Saving
• Maximum Power Saving
This setting is not supported on Windows XP client
computers.