Lenovo ThinkPad L410 Deployment Manual page 48

Table 6. Power Agenda* (continued)
Policy settings
ThinkPad LCD Brightness 16
ThinkPad LCD Brightness 8
External monitor brightness
42
Power ManagerDeployment Guide
Description
Power Plan (For Windows Vista/7) or Switch to a
Power Scheme (For Windows XP), users cannot use
this power agenda on client computers. See the
action policy setting in Table 6 "Power Agenda*" on
page 39.
Specifies the brightness level (from 0 to 15) of client
computer monitors with 16 brightness levels.
If you set the Action policy setting to Change monitor
brightness, you should enable this policy setting and
input a brightness level. See the action policy setting in
Table 6 "Power Agenda*" on page 39.
If you disable or do not configure this policy setting,
but set the Action policy setting to Change monitor
brightness, users cannot use this power agenda on
client computers. See the action policy setting in Table 6
"Power Agenda*" on page 39.
Note: The range of the brightness level is from 0 to
15. The monitor brightness increases when you select
a higher brightness level. This policy setting does not
support monitors with a brightness level higher than 15.
Specifies the brightness level (from 0 to 7) of client
computer monitors with 8 brightness levels.
If you set the Action policy setting to Change monitor
brightness, you should enable this policy setting and
input a brightness level. See the action policy setting in
Table 6 "Power Agenda*" on page 39.
If you disable or do not configure this policy setting,
but set the Action policy setting to Change monitor
brightness, users cannot use this power agenda on
client computers. See the action policy setting in Table 6
"Power Agenda*" on page 39.
Note: The range of the brightness level is from 0 to 7. The
monitor brightness increases when you select a higher
brightness level. This policy setting does not support
monitors with a brightness level higher than 7.
Specifies the brightness level (from 0 to 100) of the
external monitor.
If you set the Action policy setting to Change monitor
brightness, you should enable this policy setting and
input a brightness level. See the action policy setting in
Table 6 "Power Agenda*" on page 39.
If you disable or do not configure this policy setting,
but set the Action policy setting to Change monitor
brightness, users cannot use this power agenda on
client computers. See the action policy setting in Table 6
"Power Agenda*" on page 39.
Notes: