Table of Contents
Advertisement
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP] (P103).
„ Birthday/Name setting
„
1 Touch [SET] of [AGE] or [NAME].
2 Enter the birthday or name.
Birthday: Touch [e]/[r] for each item to set year/month/day,
and touch [SET].
Name:
For details on how to enter characters, read the
"Entering Characters" section on P94.
• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting
screen appears automatically.
3 Touch [EXIT] to finish.
„ To cancel [AGE] and [NAME]
„
Select the [OFF] setting in step 1 of the "Birthday/Name setting" procedure.
Note
• The age and name can be printed out using the "PHOTOfunSTUDIO" bundled software
on the CD-ROM (supplied).
• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the
age or name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
• The focus range is 5 cm (0.17 feet) (Wide)/1.0 m (3.28 feet) (Tele) to 7.
• When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER]
is set to [OFF], the shutter speed becomes a maximum of 1 second.
• [,] is activated, and maximum ISO sensitivity level becomes [ISO1600].
• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed
at the lower left of the screen for about 5 seconds, along with the current date and time.
• If the age is not properly displayed, check the clock and birthday settings.
• The birthday setting and name setting can be reset with [RESET].
• The initial setting for [AF MODE] is [3].
Advanced (Recording pictures)
[BABY1] / [BABY2]
- 68 -
Advertisement
Table of Contents
