Download  Print this page

Tools Required - Lenovo IdeaCentre B520e Hardware Replacement Manual

Lenovo ideacentre b5 series hardware replacement manual v3.0.
Hide thumbs


You can find the following information:
CRU removal and installation information
Troubleshooting information
Parts information
Links to other useful sources of information
To access this information, go to:

Tools required

To disassemble the computer, you need the following tools:
Wrist grounding strap and conductive mat for preventing electrostatic
Flat screwdriver
Phillips screwdriver
Hex screwdriver
Plastic flat screwdriver
Plastic tweezers
Note: The screws for the different components vary in size. During the
disassembly procedure, group the screws with their corresponding
components to avoid a mismatch when replacing the components.
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
When you are replacing a part, do not open the static-protective package
containing the new part until the defective part has been removed from the
computer and you are ready to install the new part.
When you handle parts and other computer components, take these precautions
to avoid static-electricity damage:
Limit your movement. Movement can cause static-electricity to build up around
Hardware Replacement Guide


   Related Manuals for Lenovo IdeaCentre B520e

This manual is also suitable for:

Ideacentre b5 series

Comments to this Manuals

Symbols: 0
Latest comments: