Replacing The Hard Disk Drive - Lenovo IdeaCentre B520e Hardware Replacement Manual

Lenovo ideacentre b5 series hardware replacement manual v3.0
Hide thumbs Also See for IdeaCentre B520e:
Table of Contents

Advertisement

11. Install the new optical drive as follows:
(1) Align the new optical drive with the cover, and then push the cover back into
position.
(2) Screw the metal bracket back onto the new optical drive.
(3) Slide the new optical drive into the drive bay.
12. Screw the new optical drive back onto the chassis.
13. Slide the computer cover back into position.

Replacing the hard disk drive

Attention:
Turn off the computer and wait 3 to 5 minutes to let the computer cool
down before replacing the hard disk drive.
To replace the hard disk drive:
Note: It may be helpful to place the computer face-down on a soft flat surface
for this procedure. Lenovo recommends that you use a blanket, towel, or
other soft cloth to protect the screen from scratching or other damage.
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Loosen the screw that secures the hard disk drive bay to the chassis.
Hardware Replacement Guide
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideacentre b5 series

Table of Contents