Policies Tab - HP BladeSystem bc2000 - Blade PC Administrator's Manual

To Create a Data Center
1. Click Create.
2. Type the data center name and enclosure password.
3. Click Save.
To Change a Data Center
1. Click on a link in the Data Center column.
2. Change the Data Center name and/or password.
3. Click Save.
To Add Enclosures into a Data Center
1. Select the check box for the appropriate data center.
2. Choose View Enclosures from the Operation list and click Go.
3. Click Add.
4. Enter search terms (optional) then click Search.
5. Select the check boxes for the enclosures to add, and then click Save.
6. Click Close.
To Delete Enclosures from a Data Center
1. Select the check box for the appropriate data center.
2. Choose View Enclosures from the Operation list and click Go.
3. Select the check boxes for the enclosures to delete.
4. Click Delete.
5. Click Close.
To Delete a Data Center
1. Select the check box for the appropriate data center or data centers.
2. Choose Delete from the Operation list and click Go.
3. Click OK.

Policies Tab

Policy management allows administrator to override the user's HP SAM client settings. In general, the
user is allowed the flexibility to customize the connection settings on the client side. If there are specific
settings that the user must always connect with, then the administrator may use the Policies tab to
define the forced settings.
HP SAM Administrator Console Tabs 57