Save & Exit Setup; Exit Without Saving - Asus P3B-1394 User Manual

IMPORTANT! If your hard disk was already formatted on an older previous sys-
tem, incorrect parameters may be detected. You will need to enter the correct pa-
rameters manually or use low-level format if you do not need the data stored on the
hard disk.
If the parameters listed differ from the ones used when the disk was formatted,
the disk will not be readable. If the auto-detected parameters do not match the
ones that should be used for your disk, do not accept them. Press <N> to reject
the presented settings and enter the correct ones manually from the Standard
CMOS Setup screen.
4.12 Save & Exit Setup
Select this option to save into the CMOS memory all modifications you specified
during the current session. To save the configuration changes, highlight the "Save &
Exit Setup" option on the main screen, type "Y", and then press <Enter>.

4.13 Exit Without Saving

Select this option to exit the Setup utility without saving the modifications you specify
during the current session. To exit without saving, highlight the "Exit Without Sav-
ing" option on the main screen and then press <Enter>.
62
4. BIOS SETUP
ASUS P3B-1394 User's Manual