Asus P3B-1394 User Manual page 24

3. HARDWARE SETUP
WARNING!
Make sure the heatsink is mounted tightly against the SECC2, SECC,
or SEPP; otherwise, the CPU will overheat. You may install an auxiliary fan to
provide adequate circulation across the processor's passive heatsink.
3. Insert the SECC2/SECC/SEPP
SECC with Pentium
a click (the picture in step 2 shows the locks in the outward position and inward in
the picture below).
With the heatsink facing the motherboard's chipset, push the SECC2, SECC, or
SEPP gently but firmly into the Slot 1 connector until it is fully inserted.
SECC
Push lock inward
4. Secure the SECC2/SECC/SEPP
Secure the SECC2/SECC/SEPP in place by pushing the SECC2/SECC/SEPP
until it is firmly seated on the Slot 1 connector.
SECC with Pentium
cured so that the lock shows through the retention mechanism's lock holes.
SECC
Lock hole
24
®
II only: Push the SECC's two locks inward until you hear
CPU fan cable to
fan connector
®
II only: The SECC locks should be outward when se-
CPU fan cable to
fan connector
ASUS P3B-1394 User's Manual
SECC2/SEPP
SECC2/SEPP
Lock hole
CPU fan cable to
fan connector
CPU fan
cable to fan
connector