Asus P2B-N User Manual page 38

3. HARDWARE SETUP
4) Front Panel Microphone Connector (2-pin MIC-CON)
This connector is used to connect the front panel microphone jack to the moth-
erboard through a ribbon cable.
NLX-R
®
®
B9-N
YEONG-YANG
Front Panel Microphone Jack
5) NLX Power Supply Connector (20-pin block)
This connector connects to an NLX power supply. The plug from the power sup-
ply will only insert in one orientation because of the different size holes. Find the
proper orientation and push down firmly making sure that the pins are aligned.
IMPORTANT:
Make sure that the NLX power supply can deliver at least 720mA
on the 5volt standby lead (+5VSB). You may experience difficulty in powering
ON your system without this specification.
NLX-R (Back)
B9-N (Back)
Yeong-Yang (Back)
NLX Power Connector
NLX Power Supply Connector
38
NLX-R (Front)
B9-N (Front)
Yeong-Yang (Front)
ASUS P2B-N User's Manual
The front panel's 1/8" microphone
jack connects to the riser card
through a ribbon cable