Table of Contents
Advertisement
Profiles—set tones
To set and customise the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press
, and select
currently selected profile is other than General, the profile
name is shown at the top of the display in the standby
mode.
To change the profile, press
Scroll to the profile you want to activate, and select OK.
To modify a profile, press
Scroll to the profile, and select
Scroll to the setting you want to change, and press
open the choices. Tones stored on a memory card are
indicated with
. You can scroll through the tone list
and listen to each one before you make your selection.
Press any key to stop the sound.
Tip! In the list of tones,
of bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
To create a new profile, select
Tools
> Profiles. If the
in the standby mode.
, and select
Tools
> Profiles.
Options
> Personalise.
Tone downloads
opens a list
Options
>
Create
new.
Offline profile
The
Offline
profile lets you use the device without
connecting to the wireless network. When you activate
the
Offline
profile, the connection to the wireless network
is turned off, as indicated by
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Warning: In the offline profile you cannot make or
receive any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first
activate the phone function by changing profiles. If the
to
device has been locked, enter the lock code.
Warning: Your device must be switched on to use
Offline
profile. Do not switch the device on when
wireless device use is prohibited or when it may cause
interference or danger.
To leave the
Offline
profile, press
profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If Bluetooth
connectivity is activated before entering the
profile, it will be deactivated. Bluetooth connectivity is
automatically reactivated after leaving the
See 'Bluetooth connectivity settings', p. 84.
in the signal strength
, and select another
Offline
Offline
profile.
19
Advertisement
Table of Contents
