Remote Synchronisation; Create A New Synchronisation Profile - Nokia N72 - Smartphone 20 MB User Manual

Speed—The current speed of both sending and receiving
data in kilobytes per second.
Dial-up—The dial-up number used.
Name—Access point name used.
Shared (not shown if the connection is not shared)—The
number of applications using the same connection.

Remote synchronisation

Press , and select
to synchronise your notes, calendar, and contacts with
various calendar and address book applications on a
compatible computer or on the Internet.
The synchronisation application uses SyncML technology
for synchronisation. For information on SyncML
compatibility, contact the supplier of the calendar or
address book application you want to synchronise your
data with.
You may receive syncronisation settings in a special text
message. See 'Data and settings', p. 57.

Create a new synchronisation profile

1
If no profiles have been defined, your device asks if you
want to create a new profile. Select Yes.
88
Connect. > Sync. Sync enables you
To create a new profile in addition to existing ones,
select Options > New sync
you want to use the default setting values or copy the
values from an existing profile to be used as the basis
for the new profile.
2
Define the following:
Sync profile name—Write a descriptive name for the
profile.
Data bearer—Select the connection type: Web, or
Bluetooth.
Access point (shown only if
Web)—Select an access point to use for the data
connection.
Host address—The IP address of the host server.
Contact your service provider or system administrator
for the correct values.
Port (shown only if Data bearer
Contact your service provider or system administrator
for the correct values.
User name—Your user ID for the synchronisation
server. Contact your service provider or system
administrator for your correct ID.
Password—Write your password. Contact your service
provider or system administrator for the correct value.
Allow sync requests—Select
the server to start a synchronisation.
profile. Choose whether
Data bearer is set to
is set to Web)—
Yes if you want to allow