Connectors - Sony KDL-32S3000W - 32" Class Bravia S-series Digital Lcd Television Service Manual

21 Pin Connector (SCART)
21
19
17
15
13
11
9
7
5
3
1
WARNING (UK Models only)
The flexible mains lead is supplied connected to a B.S. 1363 fused
plug having a fuse of 13 AMP rating. Should the fuse need to be
replaced, use a 13AMP FUSE approved by ASTA to BS 1362, ie one
that carries the mark.
T
ASA
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUIT-
ABLE FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD
BE CUT OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG
SEVERED FROM THE MAINS LEAD MUST BE DESTROYED AS A
PLUG WITH BARED WIRES IS DANGEROUS IF ENGAGED IN A
LIVE SOCKET.
When an alternative type of plug is used, it should be fitted with a
13 AMP FUSE, otherwise the circuit should be protected by a
13AMP FUSE at the distribution board.

CONNECTORS

20
18
16
14
12
10
8
6
4
2
UK PLUG WARNING
Pin No 1 2 Signal
1 Audio output B
(right)
Audio input B
2 (right)
Audio output A
3 (left)
4 Ground (audio)
5 Ground (blue)
6 Audio input A
(left)
7 Blue input
8 Function select
(AV control)
9 Ground (green)
10 AVlink
11 Green
12 Open
13 Ground (red)
14 Ground (blanking)
_ _ Red input
15
_ (S signal Chroma
- -
input)
16 Blanking input
(Ys signal)
17 Ground (video
output)
18 Ground (video
input)
19 Video output
Video input
20
Video input
- -
Y (S signal)
21 Common ground
(plug, shield)
Connected Not Connected (open)
- 5 -
RM-ED009
Signal level
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Standard level : 0.5V rms
Output impedence : More than 10kohm*
0.7 +/- 3dB, 75 ohms positive
High state (9.5-12V) : Part mode
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
Green signal : 0.7 +/- 3dB, 75 ohms,
positive
0.7 +/- 3dB, 75 ohms, positive
0.3 +/- 3dB, 75 ohms, positive
High state (1-3V) Low state (0-0.4V)
Input impedence : 75 ohms
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
* at 20Hz - 20kHz
How to replace the fuse.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
FUSE
SE1A