Hunter 28671 Owner's Manual
Owner's manual
Hide thumbs
Also See for 28671:
- Installation manual (1 page) ,
- Parts manual (2 pages) ,
- Manual de usuario (16 pages)
Table of Contents
Advertisement
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42435-01
20100524
©2010 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 28671
Summary of Contents for Hunter 28671
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42435-01 20100524 ©2010 Hunter Fan Co.
-
Page 2: Table Of Contents
Fan ....... 15 use a solid-state speed control with this fan. Use only Hunter speed 10 •... - Page 3 If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
- Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42435-01 • 05/24/10 • Hunter Fan Company...
- Page 5 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42435-01 • 05/24/10 • Hunter Fan Company... -
Page 8: Assembling The Fan For Ceilings 9 Feet Or Higher
3 • Assembling the Fan for Ceilings 9 Feet or Higher Your Hunter fan comes with an optional 8” downrod extension Step 3-2 Step 3-3 pipe. If you are hanging the fan on a ceiling higher than 9 feet tall and you would like to use the enclosed optional downrod, follow Steps 3-1 –... -
Page 9: Assembling The Fan For Ceilings 8-9 Feet High
4 • Assembling the Fan for Ceilings 8-9 Feet High Your Hunter fan comes with an optional 8” downrod extension pipe. Steps 4-2 – 4-3 The optional extension pipe can only be used with ceilings 9’ tall or Downrod higher. If you want to use the optional extention pipe, follow Steps 3-1 –... -
Page 10: Wiring The Fan
5-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42435-01 • 05/24/10 • Hunter Fan Company... -
Page 11: Installing The Canopy And Canopy Trim
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42435-01 • 05/24/10 • Hunter Fan Company... -
Page 12: Assembling The Blades
7-4. Repeat steps 7-2 and 7-3 for the remaining two blades. Note: The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. -
Page 13: Completing Your Installation With A Bowl Light Fixture
8 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 8-1. Connect the wires in the switch housing to the wires in the LED light fixture by plugging the two single molex plug connectors together. -
Page 14: Fan
8-5. Install the pull chain with the light pendant attached to the chain on the right side of the Hunter logo on the body of the fan. Attach the pull chain with the fan pendant to the chain on the left side of the Hunter logo. - Page 15 9-5. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades.
-
Page 16: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42435-01 • 05/24/10 • Hunter Fan Company...