Cd And Dvd Drives - Compaq Presario CQ3100 - Desktop PC Getting Started Manual

Getting started
Hide thumbs Also See for Presario CQ3100 - Desktop PC:
Table of Contents

Advertisement

Internet access (continued)
Symptom
Internet programs do
not start automatically.

CD and DVD drives

Symptom
The CD or DVD drive
cannot read a disc, or it
takes too long to start.
I cannot remove a CD
or DVD.
My minidisc CD is
falling down inside the
computer.
38
Getting Started (features vary by model)
Possible solution
Log in to your ISP, and start the desired program.
Possible solution
Ensure the disc is inserted with the label facing out and
centered in the tray.
Wait at least 30 seconds for the drive to determine the type of
media.
Clean the disc with a disc cleaning kit, available from most
computer stores.
The driver may be corrupted or outdated. For detailed
information about restoring and updating drivers, see
"Updating drivers" on page 45.
Turn on your computer, and press the Eject button nearest the
drive to open the tray.
If you suspect a problem with the Eject button itself:
1
Click the Start button, and then click Computer.
2
Right-click the CD or DVD drive you want to open.
3
Select Eject from the menu.
Vertical and slot-loading disc players cannot play non-standard
discs.
For a CD/DVD drive with a tray that is installed in a vertical
position, standard-sized discs fit into the drive tray vertically,
with the label facing out. To use a minidisc with a vertical drive
tray, you must first place the computer on its right side (select
models only) before you insert the minidisc:
1
Face the front of the computer and lay the computer down
on its right side.
2
Press the Eject button to open the CD/DVD tray.
3
Place the minidisc into the recess inside the tray, and then
press the front of the tray to close it.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents