Compaq Presario CQ3100 - Desktop PC Getting Started Manual page 100

Wireless keyboard and mouse (continued)
Symptom
Wireless keyboard or
mouse does not work or
is not detected.
(continued)
34 Getting Started (features vary by model)
Possible solution
Resynchronize the keyboard and mouse to the
receiver:
The receiver, wireless keyboard, and wireless mouse shown in
the illustrations are examples; your models may vary.
IMPORTANT: During these steps, place the wireless keyboard
and wireless mouse on the same level as the receiver, within
30 cm (12 inches) of the receiver, and away from interference
from other devices.
1 Unplug the receiver from a USB connector on the
computer, and then reconnect it. Your computer model
may have a connector dedicated to the receiver. If you
have a choice, use a USB connector on the front of the
computer.
2 The receiver may have an LED light or a Connect button,
which is also an LED light. Skip this step if your receiver
has no Connect button (A).
Push the Connect
A
button (A) on the
receiver (which is also the
LED light), and hold it for
5 to 10 seconds until the
light starts to flash.