Connecting Headphones; Connecting A Microphone - Compaq Presario CQ3100 - Desktop PC Getting Started Manual

Connecting a stereo speaker system
To connect active speakers, such as left/right stereo speakers or a 2.1 system of two speakers
and a subwoofer, to the computer:
1 Ensure that the computer is turned off, and that the speaker system is turned off and
unplugged.
2 Connect the speaker system cable to the lime green Audio Line Out connector that
matches the back of your computer.
Or
For 2.1 speakers or other multichannel speakers that were shipped with your computer
(select models only), connect the subwoofer to the Audio Line Out connector on the
computer, and connect the left and right speakers to the subwoofer.
NOTE: Always turn on the computer before you turn on the speaker system.

Connecting headphones

Headphones are available separately.
Your computer comes with a headphones connector (lime green) on the front of the
computer. The headphones connector is labeled with a headphones icon.
You can also connect headphones to the Audio Line Out connector (lime green) on
the back of your computer.
When headphones are plugged in, the sound to the speakers (and the subwoofer) is
usually muted.

Connecting a microphone

Microphones are available separately.
Your computer comes with a microphone connector (pink) on the back of the computer. Some
models have a second microphone connector on the front of the computer (select
models only).
Connect the microphone to the microphone connector on the computer.
To adjust the recording volume or select the microphone, see "Selecting the Microphone" on
page 16.
Setting Up Your Computer 5