Preparations Before Ironing - Bosch TDS4570GB Operating Instructions Manual

4. Steam settings:
Steam level selection touch
icon is used to change the
amount of steam coming out
of the soleplate.
Low steam flow
Medium steam flow
High steam flow
When "i-Temp" and "AntiShine"
functions are selected, it is not
possible to change the steam setting
by pressing the
amount is automatically selected.
Only on
possible to change the steam amount.
To change the amount of steam
manually, touch the
display (8) repeatedly. The steam
generator runs through the following
cycle:
The selected icon flashes until the
pressure corresponding to each steam
level is reached. Steam is now ready
to be released by pressing the steam
release buttons (13 or 14*).
5. Other indicators:
Indicates (flashing) that the
auto shut-off system has
been activated.
Indicates (flashing) that the
water tank (1) is empty and
must be filled.
Indicates (flashing) that
the boiler and the filter (12)
must be rinsed.
8
BOSC H
icon. The steam
settings it is
icon on the
6. Beep activation/deactivation
You can activate or deactivate a beep
which may be heard when touching the
icons on the display (8).
To do this, simply touch the
icons at the same time for 3 seconds.
After this time, a long beep will be
emitted indicating that the beep has
been activated or deactivated.
Preparations
5
before ironing
For details of the following actions,
please see the related chapters of this
user manual.
1. Release the iron from its SecureLock
system (10) by pulling the lever
located at the heel of the iron
backwards.
2. Remove any label or protective
covering from the soleplate (16).
3. Place the appliance horizontally
on a solid, stable surface. You may
remove the iron pad (2) from the
appliance and place the iron on it
on another solid, stable, horizontal
surface.
4. Fill the removable water tank (1).
If the tank is removed, three beeps
may be heard.
and
* Model dependent