Yamaha YSP 800 - Digital Sound Projector Five CH Speaker Owner's Manual page 16

Owner's manual
Hide thumbs Also See for YSP 800 - Digital Sound Projector Five CH Speaker:
Table of Contents

Advertisement

INSTALLATION
■ Using a metal wall bracket
You can use the optional metal wall bracket to mount this
unit on the wall in your listening room.
This unit
y
Refer to the instructions supplied with the metal bracket for
details on how to attach the metal bracket to the wall or how to
attach this unit to the metal bracket.
Note
This unit is the model that the metal apparatuses are not attached
to the rear panel. If there is the section of "Detach the metal
apparatuses from the Sound Projector" in the instructions
supplied with the metal bracket, skip the section and proceed to
the next. Also, use the supplied projector mounting screws (M4,
spare) instead if there is the information about using screws of the
metal apparatus (M4) in the section of "Attach the small wall
mount brackets to the Sound Projector".
12
Metal wall bracket
TV
■ Using a stand
You can mount your TV on the stand placed on a
commercially available rack to install this unit under your
TV.
TV
This unit
y
Refer to the instructions supplied with the stand for details on
how to install the stand or how to mount this unit and the TV on
the stand.
■ Using a rack
You can install this unit either above or under your TV in a
commercially available rack.
When this unit is installed above your TV
When this unit is installed under your TV
Note
Make sure that the rack is large enough to allow adequate
ventilation space around this unit (see page 11) and that it is
strong enough to support the weight of both this unit and your TV.
Stand

Advertisement

Table of Contents
loading

Table of Contents