Control Board - Elation PLATINUM BEAM 5R XM485-V1.0-NR User Manual

to 1, the second unit to 14(13 + 1), the third to 27 (13 + 14), and so on.

Control Board

The Control Board offers several features: you can simply set the starting address , run the pre-programmed
program or make a reset.
The main menu is accessed by pressing the
menu by pressing the
order to select the desired menu. You can change the selection by pressing the the
button , -button or
every mode by pressing the
will exit from flash 10 seconds after the last keypress. Press this key under edit mode, . The functions provided
are described in the following sections.
To access the display menu via the internal battery, press the DC switch button for 2seconds; To shut off
the display immediately, choose the commend " Reset All" menu and press "Enter" button, otherwise,
the display will automatically switch off about 1 minute from last button press.
Fun Set Dmx Address Set Dmx Address Set Dmx Address Set Dmx Address
ctio Value Display Value Display Value Display Value Display
n Set To Slave Set To Slave Set To Slave Set To Slave
Mo Auto Program Auto Program Auto Program Auto Program
de Music Control Music Control Music Control Music Control
Time Information Current Time
Info
rma
tion
-button , -button ,
-button. Confirm every selection by pressing the
-button. The functions provided are described in the following sections. it
A001~AXXX A001~AXXX A001~AXXX A001~AXXX
PAN...... PAN...... PAN...... PAN......
Slave1,Slave2,Slave3 Slave1,Slave2,Slave3 Slave1,Slave2,Slave3 Slave1,Slave2,Slave3
Master / Alone Master / Alone Master / Alone Master / Alone
Master / Alone Master / Alone Master / Alone Master / Alone
Current Time Current Time Current Time Current Time
Total Life Hours Total Life Hours Total Life Hours Total Life Hours Total Life Hours
Last Run Hours Last Run Hours Last Run Hours Last Run Hours Last Run Hours
Lamp Hours Lamp Hours Lamp Hours Lamp Hours Lamp Hours
Lamp Off Time Lamp Off Time Lamp Off Time Lamp Off Time Lamp Off Time
Timer Password Timer Password Timer Password Timer Password Timer Password
Clear Last Run Clear Last Run Clear Last Run Clear Last Run Clear Last Run
L-Timer Password L-Timer Password L-Timer Password L-Timer Password L-Timer Password
Clear Lamp Time Clear Lamp Time Clear Lamp Time Clear Lamp Time Clear Lamp Time
-button until the display starts flashing. Browse through the
-button or
XXXX(Hours) XXXX(Hours)
XXXX(Hours) XXXX(Hours)
XXXX(Hours) XXXX(Hours)
XXXX(Hours) XXXX(Hours)
XXXX(Minute) XXXX(Minute)
Password=XXX Password=XXX
ON/OFF ON/OFF
Password=XXX Password=XXX
ON/OFF ON/OFF
10
XM485-V1.0-NR
-button. Press the Enter-button in
-button ,
-button. You can leave
DMX address setting
DMX value display
Slave setting
Auto program
Music control
Power on running time
Fixture running time
Fixture Last times clear
Lamp running time
Lamp off time
Timer Password 038
Clear Fixture Last time
Lamp Password Code="038"
Clear lamp time
-