Lenovo 7844B4U User Manual page 55

2. Make sure that all the internal cables are routed properly to avoid interference
with lowering the drive bay assembly and closing the computer cover. Keep the
cables clear of the hinges and sides of the chassis.
Figure 41. Cable routing (For a clear illustration of the cable routing, some components are
not shown here.)
3. Lower the drive bay assembly. See "Accessing the system board components
and drives" on page 17.
4. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on
page 15.
Chapter 2. Installing or replacing hardware
47