Downloading Still Images/Movies With The Imagebrowser; Starting The Imagebrowser (Mac Os 8.6-9.2) - Canon Elura 40MC Instruction Manual

Downloading Still Images/Movies with the ImageBrowser

• Observe following precautions when the camcorder's card access indicator is
flashing (the camcorder is reading or writing from or to the memory card).
Failure to do so may cause memory card data to become corrupted.
– Do not remove the memory card or detach the USB cable.
– Do not turn off the camcorder or the computer.
– Do not change the position of the POWER switch or the TAPE/CARD switch.
• Format the memory card with the camcorder or from the Camera Window
( 80).
• Still images/movies recorded onto the memory card or downloaded to the
hard disk are important original data files. Create a copy of the file first
before working on it on your computer.
Starting the ImageBrowser
1.
Insert the memory card to the camcorder.
• When connecting a PC card reader, see "Using a PC Card Reader"
( 78).
2.
Connect the Power Adapter to the camcorder.
3.
Connect the camcorder to the computer using the supplied
USB cable (
4.
Set the camcorder to CARD PLAY (VCR) mode.
• ImageBrowser starts and the ImageBrowser Automation Wizard dialog
appears.
5.
Select [Display Images] and click the [OK] button.
• The Communications Settings dialog appears. This dialog only appears
the first time the camcorder is connected.
74).
Mac OS 8.6-9.2
E
75