Downloading Still Images (Imagebrowser) - Canon DC22 - 2.2MP DVD Camcorder Instruction Manual

Downloading Still Images (ImageBrowser)

Below explains the procedure for connecting a camcorder to a computer using the
USB cable. For connecting a card reader/writer, see Using a Card Reader/Writer
( 34).
Proper operation when connecting to a computer or printer cannot be
guaranteed if the disc inserted into the camcorder was recorded or used in a
non-Canon digital device.
You cannot connect the camcorder to a computer if the disc or memory card
contains more than 1800 images, and you may not be able to download
images with ImageBrowser or an OS standard software (depending on the
computer you are using and the installed OS) if the disc or memory card
contains more than approximately 1000 images. When using a memory
card, please use a card reader/writer to download the still images; for the
disc, please use your computer's DVD drive. When using the DVD drive to
download the images recorded on the disc, it is necessary to insert a
finalized disc.
- You cannot record any new images on the finalized DVD-R disc or
unfinalize it.
- For instructions on how to connect a card reader/writer, see Using a Card
Reader/Writer (
Observe the following precautions when the camcorder's access indicator is
flashing. Failure to do so may cause disc or memory card data to become
corrupted.
- Do not open the disc or memory card cover, remove the disc or memory
card or detach the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the position of the power switch or the
Images recorded onto the disc, memory card or downloaded to the hard disk
are important original data files. Create a copy of the file first before working
on it on your computer.
34).
Downloading Still Images (ImageBrowser)
/ switch.
E
27