Downloading Still Images (Imagebrowser) - Canon HR10 - Camcorder - 1080i Instruction Manual

Downloading Still Images (ImageBrowser)

Below explains the procedure for connecting a camcorder to a computer using the
USB cable. For connecting a card reader/writer, see Using a Card Reader/Writer
( 33).
You cannot connect the camcorder to a computer if the memory card
contains 1800 images or more, and you may not be able to download
images with ImageBrowser or OS standard software (depending on the
computer you are using and the installed OS) if the memory card contains
more than approximately 1000 images. In this case, use a card reader/writer
to download images.
- For instructions on how to connect a card reader/writer, see Using a Card
Reader/Writer (
Observe the following precautions when the camcorder's access indicator is
flashing. Failure to do so may cause memory card data to become
corrupted.
- Do not remove the memory card or detach the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the position of the POWER switch or the
Images recorded onto the memory card or downloaded to the hard disk are
important original data files. Create a copy of the file first before working on it
on your computer.
26 Downloading Still Images (ImageBrowser)
33).
/ switch.