Canon DW-100 User Manual page 23

I
To
CREATE AN ADDITIONAL COpy OF THE SAME DISC
After the operation is finished, insert a brand
new disc and close the disc tray. After the
information screen described in step 3 is
displayed, repeat step 4.
o
IMPORTANT
• Observe the following precautions while the HOD
indicator on the camcorder is on or flashing.
Failing to do so may result in permanent data
loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not disconnect the USB cable.
- Do not disconnect the power source or turn off
the camcorder or the DVD Burner.
- Do not change the position of the
.~
/0
switch or the operating mode.
• High-definition (AVGHD) discs created using the
DW-100 DVD Burner can be played back only
with AVGHD-compatible DVD players. Do not
insert a high-definition disc into a DVD player
that is not compatible with AVGHD specifications
as you may not be able to eject the disc.
Playing Back AVCHD Discs
You can use the DVD Burner and the camcorder
also to play back high-definition (AVGHD) discs on
a TV. This is very convenient, for example to play
back your discs even in a location where an
AVGHD-compatible DVD player is not available.
1
Connect the camcorder to the TV.
Refer to Connection Diagrams in the
camcorder's instruction manual. Select
connection
0
or
fA
to enjoy high-definition
playback.
2
Turn on the camcorder and set it to
flUY'",)
mode.
3
Turn on the DVD Burner and set it to Disc
Playback mode.
Refer to Playing DVDs in the instruction
manual of the DW-100.
4
Connect the camcorder to the DVD Burner
using the USB cable.
• Refer to Connections in the instruction
manual of the DW-1 00.
• If the device type selection screen appears,
select [DVD BURNER] and press
@.
5
Insert the disc you want to play back into
the DVD Burner.
• Use the OPEN/CLOSE button on the DVD
Burner to open and close the disc tray.
• After the disc is recognized, the disc's
content will be displayed in an index
screen.
6
Use the navigation buttons to move the
selection frame to the scene you want to
play back.
7
Press
I
~/1I1
to begin the playback.
(i)
NOTES
• Only AVGHD discs created with the DW-100 DVD
. Burner can be played back using the DVD
Burner.
• The FUNG. menu and setup menus cannot be
accessed while the camcorder is connected to
the DVD Burner.
• Some of the special playback modes (slow
playback, fast playback at 60x speed, etc.)
cannot be used for disc playback.
5
•