Canon DW-100 User Manual page 14

4
Press the OPEN/CLOSE button and load the disc.
The disc tray opens. For single-sided discs, load the disc
In
the disc tl-ay with the label side facing up.
Make sure to use only discs that are compatible fOI- playback with this burner.
(0
7)
5
Press the OPEN/CLOSE button.
The disc tray closes.
POWER I
MODE
R'C
o
PLAY
o
<:)
o
OPENI
CLOSE
6
Select the scene and play back the disc content using the
camcorder.
For details. refer to the camcorder's instruction manual.
7
When you have finished playing back the disc, stop playback
using the camcorder.
8
Press the OPEN/CLOSE button.
The disc tray opens. Remove the disc.
Playback will also stop if the burner's power is turned off,
CD
NOTES
Play mode is available only when this burner is used in combination with a
compatible Canon AVCHD camcorder.
It is not possible to set the burner to play mode when it is connected to any device
other than a compatible Canon AVCHD camcorder.
The following discs can be played back using the burner:
AVCHD discs created on this burner
14
En