Emptying The Dirt Container - Bissell Total Floors® Pet User Manual

O
perations
Pet Hair Fabric Tool
(select models):
use this tool on fabrics such as drapes, beds
or anywhere else pet hair may collect.
Long Reach Dusting Tool
(select models):
use this tool for dusting large surfaces.
TurboBrush Tool
(select models):
use rotating brush action for small flat areas
such as stair and cushions. press gently down
and pull toward you in raking motion; too much
pressure will cause brush to stop rotating.
Pet TurboEraser Tool
(select models):
use for removing dirt and pet hair from stairs,
upholstery, area rugs, and other small areas.
pull the tool towards you in a raking motion.
Note: The Pet TurboEraser Tool is
designed to remove pet hair from
upholstered or carpeted surfaces.
It should not be used on pets.

Emptying the dirt container

empty the dirt container as soon as the dirt
reaches the "fill" line on the front of the cup.
1. unplug the vacuum from the electrical outlet.
2. slide the lock 'n seal lever to the left.
3. grasp the handle and pull the dirt cup
straight out to remove from the vacuum.
4. empty dirt into garbage container.
NOTE: Emptying the dirt container
after every use will help prevent
overfilling, and ensure that the
vacuum is ready to go the next
time you clean.
w w w . b i s s e l l . c o m
2.
8 0 0 . 2 3 7 . 7 6 9 1
9