Maintenance & Care; Emptying The Dirt Container - Bissell Powerclean 1306 Series User Manual

Maintenance:

Emptying the Dirt Container

WARNING
To reduce the risk of electrical shock, turn power switch o and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
Press
Release
Button
Press Empty
Button
Pull handle
Pull
to push Dirt
Container away
from vacuum
Maintenance:
Cleaning the Dirt Container & Filters
1 2
Press
Press Empty
Twist
Button
and pull
away from
vacuum.
Twist top
right to
Rinse and dry all sections
separate.
of dirt container with
paper towel.
4
Post-Motor
Filter
With dirt container removed,
press red release button to
Place dry pre-motor filters back
access post-motor filter.
on top of dirt container with
Clean all filters with mild
black tabbed side on top. Place
detergent, rinse, and squeeze all
post-motor filter back to bottom
excess water. Allow filters to dry
front of vacuum and snap filter
completely before reinserting.
cover door back on.
www.BISSELL.ca
8
2
Holding Dirt Container over a trash bin,
press Release Button on back.
Snap bottom back into place
3
Remove pre-motor filters
and check for dirt on BOTH
sides. Separator Screen can
be rinsed and dried as well.
Pre-Motor
6
5
Filters
Checked pattern
when filter bottom
is dirty
When reassem-
bling, place top
tank piece last
and twist left.
Press to Release
Pre-Motor
Filters
Separator
Screen
Checked pattern
when filter bottom
is dirty