Replacing The Palm Rest - Gateway NV-53 Service Manual

Replacing the palm rest

Tools you need to complete this task:
Screws removed during this task:
68
CHAPTER 3: Replacing notebook components
Phillips #0 screwdriver
Flat screwdriver
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinges - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinges - top)
•
•
3 M2.5×6 black (palm rest - top side)
To replace the palm rest:
1
Complete the steps in
2
Complete the steps in
3
If the notebook has a wireless card installed, unplug the antenna cables.
4
Remove the hard drive screw, and then
.
compartment
or Non-marring plastic scribe
10 M2.5×6 black (palm rest - base side)
"Preparing the notebook" on page
"Removing the bay cover" on page
remove the hard drive from its
47.
49.