Gateway NV-52 Reference Manual page 50

Using a tray-load DVD drive
CDs or DVDs" on page 77.
[
To insert a CD or DVD:
1
2
3
To remove a CD or DVD:
1
2
3
46
CHAPTER 4: Using Drives and Accessories
Tip
For information about cleaning a CD or DVD, see
Eject button
Press the eject button on the DVD drive. After the
tray opens slightly, pull the disc tray completely
open.
Place the disc in the tray with the label facing up,
then press down carefully on the disc until it
snaps into place.
Push the tray in until it is closed.
Press the eject button on the DVD drive. After the
tray opens slightly, pull the disc tray completely
open.
Carefully lift on the edges of the disc until it
snaps off of the spindle.
Push the tray in until it is closed.
Manual eject hole
"Cleaning