Installing A Front Panel Audio Solution; Front Panel Audio Header Signal Names - Intel BOXD915PGN Product Manual

Installing a Front Panel Audio Solution

Figure 21, E on page 44 shows the location of the yellow front panel audio header. Table 8 shows
the pin assignments for the front panel audio header.
Table 8.

Front Panel Audio Header Signal Names

Pin Signal Name
1 Port1L
3 Port1R
5 Port2R
7 Sense Send
9 Port2L
To install the cable that connects the front panel audio solution to the front panel audio header,
follow these steps:
1. Observe the precautions in "Before You Begin" on page 27.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Locate the yellow front panel audio header.
5. Install a correctly keyed and shielded front panel audio cable.
6. Connect the audio cable to the front panel audio solution.
7. Replace the cover.
To restore back panel audio, follow these steps:
1. Observe the precautions in "Before You Begin" on page 27.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Remove the front panel audio cable.
5. Replace the cover.
Installing and Replacing Desktop Board Components
Pin Signal Name
2 GND
4 Presence#
6 Sense1 Ret
8 Key (no pin)
10 Sense2 Ret
45