Table of Contents
Advertisement
Installing and Replacing Desktop Board Components
Installing and Removing the Desktop Board
WARNING
Only qualified technical personnel should do this procedure. Disconnect the computer from its
power source before performing the procedures described here. Failure to disconnect the power
before you open the computer can result in personal injury or equipment damage.
NOTE
Refer to Appendix B for regulatory requirements.
Refer to your chassis manual for instructions on installing and removing the desktop board.
Figure 5 shows the location of the 11 mounting screw holes for desktop boards D915PGN and
D915PCY. Desktop boards D915PSY and D915PCM have eight mounting screw holes.
OM16880
Figure 5. Desktop Board D915PGN and D915PCY Mounting Screw Hole Locations
31
Advertisement
Table of Contents
