Table of Contents
Advertisement
Intel Desktop Board D915PGN/D915PSY/D915PCY/D915PCM Product Guide
6. Hold the processor with your thumb and index fingers oriented as shown in Figure 10. Make
sure fingers align to the socket cutouts (see Figure 10, F). Align notches (see Figure 10, G)
with the socket see (Figure 10, H). Lower the processor straight down without tilting or sliding
the processor in the socket.
7. Pressing down on the load plate (Figure 11, I) close and engage the socket lever (Figure 11, J).
Installing the Processor Fan Heat Sink
Desktop Board D915PGN/D915PSY/D915PCY/D915PCM has an integrated processor fan heat
sink retention mechanism (RM). For instructions on how to attach the processor fan heat sink to
the integrated processor fan heat sink RM, refer to the boxed processor manual or the Intel World
Wide Web site at:
http://support.intel.com/support/processors/pentium4/intnotes478.htm
34
G
G
H
F
Figure 10. Install Processor
J
I
Figure 11. Close the Load Plate
H
F
Advertisement
Table of Contents
