Nokia E72 User Manual page 61

To create a new access point group, select
Manage New destination.
>
To add access points to an access point group, select the
group and Options New access
>
existing access point from another group, select the
group, scroll to an existing access point, and select
Options Organize Copy to other
> >
To change the priority order of access points within a
group, scroll to an access point and
Organize Change priority.
>
Packet data access points
Select Menu Ctrl. panel
>
Destinations Access point, and follow the instructions
>
on the screen.
To edit a GPRS access point, open one of the access point
groups, and select an access point marked with
Follow the instructions from your service provider.
Select from the following:
Connection name — Define a name for the connection.
Data bearer — You might not be able to edit the data
bearer once defined. Define a new access point if needed.
Access point name — You obtain the access point name
from your service provider.
Options
point. To copy an
dest..
Options
>
Settings and Connection
>
.
User name — The user name may be needed to make a
>
data connection, and is usually provided by your service
provider.
Prompt password — If you must enter the password
every time you log in to a server, or if you do not want to
save your password in the device, select Yes.
Password — A password may be needed to make a data
connection and is usually provided by your service
provider.
Authentication — Select
password encrypted or
encrypted when possible.
Homepage — Depending on the access point you are
setting up, enter the web address or the address of the
multimedia message center.
>
Use access point — Select
want the device to ask for confirmation before the
connection using this access point is created, or
Automatically if you want the device to connect to the
destination using this access point automatically.
Select Options
>
following:
Network type — Select the internet protocol type to
transfer data to and from your device. The other settings
depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address
of your device.
DNS addresses — Enter the IP addresses of the primary
and secondary DNS servers, if required by your service
Secure to always send your
Normal to send your password
After confirmation
Advanced settings and from the
if you
61