Nokia E72 User Manual page 146

RTS threshold — Select the data packet size at which the
WLAN access point device issues a request to send before
sending the packet.
TX power level — Select the power level of your device
when sending data.
Radio measurements — Enable or disable the radio
measurements.
Power saving — Select whether to use the WLAN power
saving mechanism to save the power in the device battery.
Using the power saving mechanism enhances the battery
performance but may weaken WLAN interoperability.
To restore all settings to their original values, select
Options Restore
>
WLAN security settings
Select Menu Ctrl. panel
>
Destinations Access
>
on the display.
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point marked
with .
To enter the settings for the selected security mode, select
WLAN security settings.
WEP security settings
Select WEP as the WLAN security mode.
146
defaults.
Settings and Connection
>
point, and follow the instructions
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the required
WEP keys. When the WEP security mode is in use, and your
device receives a data packet not encrypted with the WEP
keys, the data is discarded.
In an ad-hoc network, all devices must use the same WEP
key.
Select WLAN security settings
WEP key in use — Select the desired WEP key.
Authentication type — Select
WEP key settings — Edit the settings for the WEP key.
WEP key settings
In an ad-hoc network, all devices must use the same WEP
key.
>
Select WLAN security settings
from the following:
WEP encryption — Select the desired WEP encryption key
length.
WEP key format — Select whether you want to enter the
WEP key data in ASCII
WEP key — Enter the WEP key data.
802.1x security settings
Select 802.1x as the WLAN security mode.
and from the following:
Open or Shared.
WEP key settings
>
or Hexadecimal format.
and