When Using Mac Os - Brother P-Touch PT-9700PC User Manual

3 Choose STATIC for the Boot Method.
Enter the IP Address, Subnet Mask and
Gateway, and then click [OK].
The address information will be saved to
4
the printer.
26

When using Mac OS

This section explains how to install P-touch
Editor 5.0 and printer driver.
Note
●
Until P-touch Editor 5.0 installation is
completed, do not connect the printer to
®
Macintosh . Make sure the USB cable is
not connected until you are instructed to
connect it.
●
You must be logged on as a user with
administrator privileges to install this
software.
●
Turn off the printer with the power button
and then with the main power switch.
Below is the example for Mac OS
Start up Macintosh
1
ROM into the CD-ROM drive.
Double click the "PT_Series" (CD-ROM)
icon.
2 Double click "Brother PT-9800PCN
Driver.pkg" in "Mac OS X" folder.
The Driver Installer starts up. Follow the
on-screen instructions.
®
®
X 10.5.7.
®
, and insert the CD-