Brother PT-2610 User Manual page 24

To install the printer driver, click the Yes button.

Windows
appears, informing you that the printer
driver has passed compatibility tests
and that the Continue Anyway button
should be pressed if a warning mes-
sage appears. Click the OK button.
The first Driver Setup dialog box
appears, informing you that the PT-
2600/2610 printer driver will be
installed. Continue with the procedure
in INSTALLING THE PRINTER DRIVER
on page 17.

If the printer driver is already installed,
click the No button. A dialog box appears
explaining that installation is finished.
Select "Yes, I want to restart my computer
now.", click the Finish button to restart the
computer, and then remove the CD-ROM
from the CD-ROM drive.
INSTALLING THE PRINTER DRIVER
With Plug-and-Play, new devices connected to the system are detected, and their drivers are
automatically installed. If the P-touch 2600/2610 is to be connected through the USB port, its
driver will be installed with Plug-and-Play. Be sure to read the installation instructions
described below before installing the printer driver supplied on the CD-ROM.

Do not connect the P-touch 2600/2610 to the computer until you are instructed to do
so, otherwise the PT-2600/2610 printer driver may not be installed correctly.
®
XP only: A message
17