Code, Alt & Shift Keys - Brother PT-2610 User Manual

RIGHT CURSOR KEY
To move the cursor one character to the right:
Press w once.
q

If this key is pressed when the cursor is at the end of a line followed by another
line, the cursor moves to the beginning of the next line.
To move the cursor several characters to the right:
Hold down w until the cursor moves to the desired position.
q
To move the cursor to the end of the current line:
Hold down c and press w.
q
To move the cursor to the beginning of the next text block:
Hold down s and press w.
q

If the cursor is already at the beginning of the last text block when these keys are
pressed, the cursor moves to the end of the text.
UP CURSOR KEY
To move the cursor up to the previous line:
Press e once.
q

If the cursor is in the first line of text, it will move to the beginning of the line.
To move the cursor up several lines:
Hold down e until the cursor moves to the desired line.
q
To move the cursor to the beginning of the entire text:
Hold down c and press e.
q
DOWN CURSOR KEY
To move the cursor down to the following line:
Press h once.
q

If the cursor is in the last line of text, it will move to the end of the line.
To move the cursor down several lines:
Hold down h until the cursor moves to the desired line.
q
To move the cursor to the end of the entire text:
Hold down c and press h.
q
Most characters can be entered simply by pressing their keys. However, to use special func-
tions or to enter capital letters, accented characters and some symbols, the following special
keys are necessary.
CODE, ALT & SHIFT KEYS
51