Sub And Bnc Input - Eizo FlexScan F930 User Manual

3 D-SUB AND BNC INPUT
Connecting two PCs to the monitor
1) Be sure that the monitor and the PC are both switched off before connecting them.
2) Connect one PC to the monitor's D-Sub connector and another to the BNC connector
securely. The BNC connection should be made with an EIZO BNC cable, available as
an option. Contact EIZO dealers for information about optional cables.
(Example)
Selecting the active input
The BNC/D-Sub selection button on the front panel can be used to select either BNC or
D-Sub connection as the active input.
The ScreenManager's "Input Priority" setting can be used to set up the automatic
selection of the input. See the below for details.
To set priority input signal
Whenever a change of signal is detected at the selected input, the monitor will switch
the input to that signal.
24
3 D-SUB AND BNC INPUT
Procedure
1) Select "Input Priority".
2) Select "Auto" by top/down arrow keys and select the
connector in which the prior signal is input.
MD-C53A (optional)