Eizo FlexScan F930 User Manual page 29

Explanation of the Characteristics of CRTs
When the monitor is not fully warmed up, the screen may look slightly colored, e.g.
reddish or bluish. This phenomenon is due to the unstableness of the electron gun during
its warm-up period. Please wait for about 30 minutes until the monitor stabilizes in order
to gain its proper color.
Problems
18) Control Pad "ENTER key"
does not operate.
19)AUTO-SIZING button does
not operates.
Points to check with possible solutions
The Adjustment Lock is probably on. To unlock: switch
off the monitor power, then hold down the down arrow
key of the control pad and switch the monitor back on.
See page 23.
The Adjustment Lock is probably on. To unlock: switch
off the monitor power, then hold down the down arrow
key of the control pad and switch the monitor back on.
See page 23.
The AutoSizing button function may be set "Fine
Contrast" in "Buttom Setting" menu. Change the setting
to "AutoSizing". See page 18.
4 TROUBLESHOOTING
E
29