Toshiba 40UL605U Owner's Manual page 85

HDTV Quick Set-Up Guide
(For US customers)
Lh
WARNING: The Owner's Manual contains important safety precautions not included in this Guide, please review completely prior to using this product.
Congratulations on the purchase of your new Toshiba High-Definition Television. You must have an HD Signal to watch an HD Picture!
Getting HDTV is easy as 1,2, 3.
There are 3 basic ways to receive an HDTV Signal on your new High-Definition TV:
Satellite Customers will need a
High-Definition satellite receiver
and appropriate dish hardware.
(Additional monthly subscription
cost may apply)
SATELLITE
3
Cable or Phone Company
HDTV Service
Cable or Phone Company HDTV
Service Customers will need to
subscribe to High-Definition
Service from your local provider.
(Additional monthly subscription
cost may apply)
2
Connect a high quality outside
antenna (not supplied) directly
to the antenna input on the TV.
(reception cannot be guaranteed
and is based on proximity to the
local signal)
Over-The- Air (Antenna)
Additional HDTV Antenna Reference Information can be obtained from
www.antennaweb.org
Digital Cable or Digital Satellite is not HDTV. The picture quality is superior to standard analog cable, but it is not HDTV! See the difference HD
Programming makes!
4
Component Video Input
ColorStream4> HD Component may also be used to
receive HDTV.
Use if no HDMlo or DVI Jack is available.
There are 3 jacks color-coded with Red-Green-Blue on
the back of the TV and HD Cable Box or HD Satellite
Receiver.
This connection will require a separate analog audio
connection. (use the red and white audio connections)
DYI to HDMl
e
Your HD Cable Box or HD Satellite Receiver may have
a DVI connection. This will be connected to the HDMlo
jack on the TV using an HDMlo cable and an HDMIO to
DVI converter.
DVI carries digital video only. Therefore, this will require
a separate analog audio connection as well. (use the red
and white audio connections)
3
HDMIO is the best connection for
HDTV.
This is a digital connection that
carries both digital video and
digital audio.
To connect directly from an
antenna or basic cable.
Connect the cable directly
to the antenna input on the
back of the TV.
I
Antenna Input
Once you have a High-Definition Signal you need to connect it to a High-Definition Input on your TV.
If you are connecting directly from an antenna or basic cable.
!
If
YiU
are using an HD Cable Box or HD Satellite Box, there are 3 standard connections that can be used to receive an HD signal.
2
HDMl
e
to HDMI"
INPUT
TV
AUDIO
R L Y P B f ' R
~
OUTPUT
Cable box
I
Satellite box
AUDIO
R L Y P B f ' R
~
t
INPUT
TV
Hum.
AUDIO •
OUTPUT
Cable box I Satellite box
DVI R AUDIO L
Kilmmm:-m
~
INPUT
TV
Hum.
OUTPUT
Cable box
I
Satellite box
Hum.
INPUT
TV
Now that you have HD Programming and are connected to an HD Input, Tune to an HD Channel (Remember not all channels are currently broadcast in HD) Sit back, relax and enjoy the superior quality of High-Definition.
Note: Standard analag TV channels and HD channels, even an the same network, broadcast
on
different channels. Example: ABC analag may be
on
channel
4,
while ABC-HD may be
on
channel 104.
If you are experiencing problems please call Toshiba Customer Service at 1-800-631-381 I
All cables and Adapters are sold separately.
For additional Toshiba Product Information visit www.tacp.com. Please remember to complete your product registration. Failure to register your product does not diminish your warranty rights.
TOSHIBA
Leading Innovation
»>